Audison APK 163 Prima 3 way System 165 mm (6.5") Woofer 100 mm (4") Midbass 26 mm (1") Tweeter 46,5 x 37,5 x 20,1 mm (1.83" x 1.47" x 0.8") APCX TW Crossover 72 x 44,5 x 23 mm (2.83" x 1.8" x 0.9") APCX MD Crossover 72 x 44,5 x 23 mm (2.83" x 1.8" x 0.9") APCX WF Crossover Power Handling 125 W Continuous Power375 W Peak Power Impedance 4 ΩFrequency Response 50 - 20k Hz Sensitivity 93,5 dB/Spl

APX 6.5 APX 6.5 features a concentric coaxial tweeter: with one single point of sound emission it is possible to obtain a consistent in-phase response, with consequent reconstruction of the acoustic scene comparable to a system of separate woofer + tweeter. The 6.5″ cones surround features the exclusive shallow “Triple Wave” profile, for maximum excursion linearity. CompTwo way coaxial

APBX 10 DS The APBX 10 DS, a 10” subwoofer loaded in a 12-litres sealed enclosure, is the line’s “flagship”. It is dedicated to the highest performing Prima systems, using the AP1 D amplifier for the sub section. The speaker’s mechanical excursion of more than 18 mm provides for incredible authority, while the refined Thiele&Small parameters set-up provides the ideal balance for all music genres.

bit One HD 13-CHANNELS HI-RESOLUTION DIGITAL AUDIO PROCESSOR Thanks to the Analog Devices DSP (ADSP-21489), 32 bit floating-point Sharc series (450 MHz clock), bit One HD Virtuoso makes the most of Hi-Res audio files achieving studio master quality in your car. bit One HD is able to develop an Audison Full DA HD chain, providing pure digital signal tranfer: the digital audio signal comes through one of the two optical digital inputs (TOSLINK up to 24 bit/192 kHz), is processed by the DSP at 24 bit/96 kHz and is sent to Audison amplifiers through two AD link ports, preserving all the information of the Hi-Res audio file reproduced. A dedicated FIR firmware release enables the user to process up to 9 digital channels with crossover FIR filters. Through this type of sound processing, much more demanding in terms of calculation resources, a leading-edge in-car listening experience is achieved. Three equalizers based on two different types of digital filters (FIR and IIR) manage the frequency response: 5 poles input equalization (MASTER and AUX) FIR type, to flatten the curve based on the input selected; IIR 11 poles output equalizer, to adapt the frequency response in the car compartment; 5 poles main equalization, FIR type, to “shape” the sound of the entire system according to the user’s personal music preferences. When bit One HD is connected to an OEM head unit, a guided configuration routine automatically synchronizes the input audio channels, which are often time-delayed from the OEM source or amplifier, prior to the signals summing. A De-equalization of the OEM system frequency response is then performed, featuring linear-phase FIR filters, to obtain an unparalleled reconstruction of the original signal without altering the phase response. The RVA (Remote Volume Aux) function allows the selection of an auxiliary source (like the Audison bit Play HD) and adjust its volume via the OEM Head Unit. The system setup is graphically managed and all the tuning features can be accessed intuitively, according to specific criteria required by the car audio industry. bit One HD features 8 memories for the pre-sets of the Windows-based (10, 8, 7 edition) PC software. Twelve input channels for four different signal typologies (amplified, pre-amplified and TOSLINK optical digital) and six different sources managed through DRC MP remote control (provided), making the bit One HD a unique interface suitable for any need. 13 analog and/or digital output channels ensure a wide expandability for any audio system configuration. Connecting the bit One HD to the Audison bit Tune through an automatic procedure, all the processor’s basic audio parameters can be optimized (time alignment, equalization and output levels) ensuring an excellent acoustic result.

bit Tune SOUND TUNING TOOL The Audison bit Tune is a revolutionary system of automatic calibration for Audison bit processors developed with bit Drive technology. Bit Tune also includes a multitude of additional features for electro-acoustic verification and analysis of any car audio system. The Audison team’s goal in developing the bit Tune was to speed up the setting of basic parameters for the calibration of the bit processors (time alignment, equalization, levels, etc.), ensuring an excellent level of acoustic performance. This phase also includes the diagnosis of common “errors” (channel inversion/phase, no signal on one channel/cable, etc.) to set the specialist free from his “routine” work and allow him to focus on the art of “fine-tuning”. Only personal interpretation and experience can achieve what a machine could never do: create “Your Sound”!